Overview Netatmo indoor climate



Delivers the indoor air values of an additional indoor module of the weather station or of a Netatmo Home Coach. One block per device. The values come through the block Netatmo account, Netatmo only renews them every 10 minutes. Noise, air pressure and health index are only measured by the Home Coach; with the indoor module these outputs stay at 0.

Outputs

TE
Temperature
Room temperature in °C.
FE
Humidity
Relative humidity in %.
CO
CO₂ ppm
CO₂ level in ppm.
LA
Noise dB
Noise level in dB (Home Coach only).
LD
Air pressure hPa
Air pressure in hPa (Home Coach only).
GI
Health index
Rating of the indoor air by the Home Coach: 0 = healthy, 1 = fine, 2 = fair, 3 = poor, 4 = unhealthy.
BA
Battery low
1 = the battery of the indoor module is below 20 % (the Home Coach has a power supply).
ER
Reachable
1 = the device is connected to the Netatmo cloud, 0 = Netatmo reports it as unreachable.
DA
Data current
1 = Netatmo renewed the values within the timeout. 0 = no data since start, account not signed in or timeout expired.


Parameters

Account
Optional. The Netatmo account block used to query this device. The selection is only shown when the project contains several accounts. Not set: the first account in the project.
Select device
Opens the list of devices the account found at Netatmo, filtered to the devices that fit this block. The selection sets device name and device ID. The Studio must be connected to the controller and the account signed in.
Device name
Name of the device at Netatmo, for display only.
Device ID
Netatmo identifier of the device, room or home. Can also be entered manually, but for a Home Coach only via »Select device«, otherwise it delivers no values. Empty: the block delivers no values and shows »Device?«.
Timeout data outdated
If no new data arrives from Netatmo within this time (minutes), »Data current« drops to 0. The other outputs keep their last known value. 0 = never outdated. Default 30 min.