Block Weather station displayThis control element shows the values of a weather station at a glance: the outdoor temperature, a symbol for the weather situation and up to six further values, for example wind, brightness or air pressure. It is for display only. If the weather station is also to control wind, rain and frost alarms or the shading, the control element Block Weather station is the better choice.
The element has no dialog – tapping it does nothing.
This section is meant for the installer of the system.
The addresses are linked directly at the control element, no function block is needed. The values come for example from a weather station on the bus or from the function block Weather station. The control element is wider than it is high; its size can be set freely. Symbol, text and spacing grow along with it, so the layout looks the same at any size.
Display |
|
| Cloudy below | Brightness in lux below which “Cloudy” is shown; from this value on “Sunny” applies. Default 5000 lux. |
| Values | Opens the list of further values. + and
– add or remove a value (six at most), the arrows move it; the
values are shown on the tile in the same order. Per value:
|
| Temperature | Outdoor temperature in °C. If it is below 1 °C while it rains, snow is shown. Not linked: 0 is shown. |
| Brightness | Brightness in lux. Below “Cloudy below” Cloudy is shown, otherwise Sunny. Not linked: the brightness counts as 0, so Cloudy is always shown. |
| Rain | Optional. Rain message: not equal to 0 means rain (or snow), 0 dry. Not linked: no rain is shown. |
| Value 1 to Value 6 | Optional. One address per value created; it carries the name from the list of values. Presented with the respective formatting. Not linked: the line is left out. |
See also General properties of all control elements.